Back to Blog
How-to Guides 2026-11-20 Sleeping Bags, Tents, Pads & Outdoor Gear 0 views

Copper Spur UL3 Footprint: Fit, Setup & Floor Protection

Copper Spur UL3 Footprint: Fit, Setup & Floor Protection

Learn how the Big Agnes Copper Spur UL3 footprint protects your tent floor, enables Fast Fly setup, and fits the UL3 and UL3 Bikepack models.

What the Copper Spur UL3 Footprint Does

A tent footprint serves two main jobs: it protects the floor of your tent from abrasion, punctures, and moisture, and it can also enable a lighter, faster pitching option. The Big Agnes Copper Spur UL3 Footprint is designed specifically for the Copper Spur UL3 and Copper Spur UL3 Bikepack tents, adding an extra waterproof layer under the tent body.

Copper Spur UL3 Footprint at a Glance

  • Copper Spur UL3 Footprint: Compatible with the Copper Spur UL3, and the Copper Spur UL3 Bikepack. This footprint fits both standard and bikepacking versions of the Copper Spur UL3, so you only need one accessory for either tent.
    Copper Spur UL3 Footprint
    Copper Spur UL3 Footprint
  • Copper Spur UL3 Footprint: The Fast Fly configuration requires the footprint, tent fly, poles, and stakes. If you want to pitch just the rainfly for a lightweight shelter, the footprint is an essential part of that setup.
  • Copper Spur UL3 Footprint: Protect the bottom of your tent and add an extra waterproof layer with a tent footprint! The footprint adds a durable, waterproof barrier between the tent floor and the ground, reducing wear and keeping the inside drier in wet conditions.

How to Set Up the Copper Spur UL3 Footprint

Setting up the footprint is straightforward. The footprint is shaped to match the tent floor, so orientation is key. Follow these steps for a standard pitch:

  1. Lay the footprint flat: Spread the footprint on a clean, level campsite with the coated side down (if one side is noticeably more waterproof) and the printed side facing up. Center it where you plan to pitch the tent.
  2. Pitch the tent as usual: Place the tent body on top of the footprint, aligning the corners. Insert the pole tips into the grommets on the footprint corners. If your tent has clip attachments, connect them after the poles are in place.
  3. Stake out the footprint corners: Use the webbing loops or grommets at each corner to stake the footprint down. This keeps it flat and prevents it from bunching under the tent floor.

Using the Footprint for Fast Fly Setup

One of the standout features of the Copper Spur UL3 Footprint is that it enables a Fast Fly configuration. This means you can pitch only the footprint, poles, and rainfly, leaving the tent body at home. The result is a lighter, more minimalist shelter that still provides overhead protection and a dry floor. To do this, set up the footprint as described, then attach the rainfly directly to the poles and stake out the fly's guylines. The footprint handles the ground protection while the fly keeps the rain off.

Care and Storage Tips

After each trip, shake off dirt and debris from the footprint before packing. If it's wet, dry it thoroughly at home before storing to prevent mildew. Fold or roll the footprint loosely; avoid tight creases that could weaken the coating over time. Store it in a cool, dry place away from direct sunlight.

Related Articles

Customer Service
Home
Products
Cart
Profile