When a sagging pole means the shock cord, not the pole
If your tent pole sections flop apart instead of snapping together, or the cord hangs slack between joints, the shock cord has stretched or frayed. The aluminum sections are usually fine; the elastic cord inside is the wear item. The Shock Cord Repair Kit - 25' is built for exactly this job: it lets you refurbish your pole set by replacing fraying, severed, or slack shock cord.
Before you order, check the cord itself rather than the pole. Pull a section apart and look for exposed elastic, a frayed sheath, or a cord that no longer pulls the sections snug. If the cord is intact and the pole still sags, the problem may be elsewhere, and a cord replacement won't fix it.
What the 25' kit covers
- Shock Cord Repair Kit - 25': Refurbish your pole set by replacing fraying, severed, or slack shock cord. This is the exact failure mode behind most sagging tent poles, so the kit targets the part that actually wears out.

Shock Cord Repair Kit - 25' - Shock Cord Repair Kit - 25': One shock cord kit will not always be enough to restring your entire poleset. Plan your quantity before you start; running short mid-restring leaves you with a half-strung pole set.
- Shock Cord Repair Kit - 25': Typically 1-2 person tents will only need one shock cord repair kit; 3+ person tents will need 2 or more. Use your tent's capacity as the first quantity guide, then confirm the length for your specific model.
How many kits to buy for your tent
Tent capacity is the simplest starting point the catalog gives. Treat it as a starting point, not a guarantee, because pole configurations vary by model.
- 1-2 person tent: Typically one shock cord repair kit is enough for the full pole set.
- 3+ person tent: Plan on two or more kits, since the pole set is longer and uses more cord.
- Unsure about your exact model: The catalog notes that specific cord lengths vary by tent model. For the exact length your tent needs, create a support case or call before ordering so you don't come up short.
Restringing a pole set with the 25' kit
The supplied product information confirms what the kit is for and how much cord you may need, but it does not include a step-by-step restringing procedure. The sequence below is a general approach for replacing slack or broken shock cord; follow your tent maker's instructions where they differ.
- 1. Lay out the full pole set: Assemble the poles in order so you can see the current cord path and note where it enters and exits each section.
- 2. Remove the old cord: Pull the frayed or slack cord out of the sections. Keep the sections in order so reassembly stays straightforward.
- 3. Cut the new cord to length: Use the old cord as your length reference, or confirm the specific length for your tent model with support before cutting.
- 4. Rethread the sections: Feed the new cord through the pole sections in the same order as the original, keeping tension so the sections snap together.
- 5. Test the snap: Fold and unfold the pole set to check that every joint pulls snug and the cord isn't overstretched or left slack.
Checkpoints before you commit to the repair
Two checks save wasted effort. First, confirm the cord is the problem: fraying, a severed cord, or visible slack are the conditions the kit is designed to address. Second, confirm your quantity. The catalog is explicit that one kit will not always restring an entire pole set, and that 3+ person tents generally need two or more. If you are restringing a large tent or an unusual pole configuration, ask support for the specific length before you cut anything.
The kit is listed in a Standard variant, and the catalog price is USD 6.87 against a comparison price of USD 9.95. That makes it a low-cost repair compared with replacing a pole set, provided the poles themselves are sound.
The kit at a glance
- Shock Cord Repair Kit - 25': Shock Cord Repair Kit - 25', Standard variant, catalog price USD 6.87 (comparison price USD 9.95). A small spend to restore a pole set you already own, rather than buying new poles.
- Shock Cord Repair Kit - 25': For the specific length of shock cord needed for your tent model, create a support case or call. Cord length varies by model, so this is the reliable way to avoid buying too little or cutting too short.

